Steel Butt Welding tiyo Fittings Tee
Tee
Materyèl: asye kabòn, asye pur, asye alyaj
Teknik: fòje ak pouse
Koneksyon: soude
Estanda: ANSI, ASME, AP15L, DIN, JIS, BS, GB
Kalite: 45 ° ak 90 ° LR / SR koud, redukteur, Tee, viraj, bouchon, kwa.
Epesè miray la: SCH5-SCH160 XS XXS STD
Sifas: Nwa Penti / Lwil oliv-prèv rouye / Cho plonje galvanised
Ang: 30/45/60/90/180°
Gwosè: 1/2"-80"/DN15-DN2000
Sètifika: ISO -9001:2000, API, CCS
Aplikasyon: endistri chimik, endistri petwòl, endistri konstriksyon ak lòt
Enspeksyon: Tcheke nan faktori nan kay la oswa enspeksyon an twazyèm pati
Anbalaj: Plywood Palettes / Ka an bwa oswa dapre spesifikasyon ou a
ASME B16.9, B16.28
| Gwosè tiyo | Tout Fittings | 90 & 45 koud ak Tees | Reduktè ak Lap Joint Stub fini | Bouchon | |||||||
|
| Dyamèt deyò nan bizote, D (1) | Dyamèt anndan nan fen (1) | Epesè miray t | Sant pou bout dimansyon A,B,C,M | Longè an jeneral, F,H |
| |||||
|
|
|
|
|
|
| Longè an jeneral, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0.06 | +1.6 | ± 0.03 | ±0.8 | Pa mwens pase 87.5% epesè nominal | ±0.06 | ±2 | ±0.06 | ±2 | ± 0.12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ±0.06 | ±1.6 | ±0.06 | ±1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | +0.09 | +2.4 |
|
|
|
|
|
|
| ±0.25 | ±6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0.16 | +4.0 | ± 0.12 | ±3.2 |
| ±0.09 |
| ±0.09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | +0.25 -0.19 | +6.4 -4.8 | ±0.19 | ±4.8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ± 0.12 | ±3 | ±0.19 | ±5 | ±0.38 | ±10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ±0.19 | ±5 |
|
|
| |
| Gwosè tiyo | Lap Joint Stub Ends (2) | 180 Retounen Bends | ||||||||||
|
| Dyamèt Deyò Lap, G | Epesè Lap | Reyon Fillet nan Lap, R | Dimansyon sant-a-sant, O | Retounen nan- Dimansyon figi, K | Aliyman nan fini, U | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0 -0.03 | +0 -1 | +0.06 -0 | +1.6 -0 | +0 -0.03 | +0 -1 | ±0.25 | ±6 | ±0.25 | ±6 | ± 0.03 | ±1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0 -0.06 | +0 -2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0 -0.06 | +0 -2 | +0.12 -0 | +3.2 -0 |
|
| ±0.38 | ±10 |
|
| ±0.06 | ±2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Gwosè tiyo | Off Angle, Q | Off Avyon, P | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0.03 | ± 1 | ± 0.06 | ± 2 |
| 5 ~ 8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0.19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0.25 | ± 6 | |
| 18 ~ 24 | ± 0.12 | ± 4 | ± 0.38 | ± 10 |
| 26 ~ 30 | ± 0.19 | ± 5 | ||
| 32 ~ 42 | ± 0.50 | ± 13 | ||
| 44 ~ 48 | ± 0.75 | ± 19 | ||
NÒT:
Out-of-round se sòm total valè absoli tolerans plis ak mwens.
Dyamèt deyò barik gade tablo ki nan paj 15 la.